CallforwardingThe field of application of call forwarding is enormous. First and foremost, it helps the owner to remain accessible connection. But there are many other possibilities. Ultimately, you decide where and when your number should be routed. Normal call forwarding has dus.net from day one.

This "normal" call forwarding have a character essentially - they are either active or not. Furthermore, there are conditions when then a call should be forwarded. In particular, when busy or offline with no response / connection. So you can already reach if you take a call or not present a redirect. In most cases, this is also sufficient. But what if not?

Now you have to pass an almost unlimited opportunity calls to a SIP connection timed. Both time, date and day of the week will be considered. With this ingenious tool you can theoretically every hour of every day in a call to another number to forward. Your only requirement is the limit. By a so-called "default routing" as you define the call forwarding always, so to speak, and is used as a fallback. This forwarding is then always used if no other time rule to apply. In each time a rule is a destination phone number in your PSTN or a SIP ports are specified, a period 0:00 to 23:59 a weekday period as Mon-Fri, and a date range for example 24.12.2012-2.1.2013 and specify the property Default forwarding. Using this data, let all possible constellations of call forwarding to achieve different goals.

What does all this cost? Nothing - the functionality is available for all tariffs. All details, please refer to the table with the following specifications.

Leistungsmerkmal Wert
Number of different time rules

unlimited

Number of concurrent forwarded destinations

10 (which a maximum of 2 simultaneously in the PSTN)

Set of time periods over time

Yes

Set of time periods over the week

Yes 

Set of time periods over a date range

Yes

Test run for the examination of the rules

Yes by specified time on the date and time

Downstream connection of a mail box

Yes

To find the function in the Customer is under Routing -> Forward / Forking -> Line Configuration.